How to change the batteries on an Image Sensor

Image Sensor - Changing batteries

The Image Sensor requires (2) - 'AA' Lithium batteries. You can purchase these batteries at stores like Walmart, Superstore and Best Buy. Liberty recommends using one of the following name brands:
  • Duracell® 
  • Energizer® 
*Note: Before changing the Batteries on any of your devices, please ensure that your security system has been disarmed.

To change the batteries on the Image Sensor: 
  1. Carefully slide the front of the Image Sensor up off of the sensor's back.
    (You do not need to remove or dismount the entire Image Sensor back and mounting arm).
  2. Replace the Image Sensor batteries with 2 AA 1.5v Energizer Ultimate Lithium batteries. Using standard alkaline batteries greatly reduces the life of the batteries.
  3. Dispose of the used batteries according to the battery manufacturer instruction or following local regulations.

    • Related Articles

    • DSC Vanishing Door/Window sensor - Changing batteries

      DSC Vanishing Door and Window Contacts may need their batteries replaced periodically. Your security system's panel will inform you when a device's battery is low. You will need: (1) x flathead screwdriver, (1) x CR2032 3 V coin battery *Note: Before ...

    • Versa Door/Window sensor - Changing batteries

      Versa door and window contacts may need their batteries replaced periodically. Your security system's panel will inform you when a device's battery is low. You will need: (1) x small flathead screwdriver, (1) x CR2032 3V coin battery *Note: Before ...

    • Maxlife Door/Window sensor - Changing batteries

      Maxlife door and window contacts may need their batteries replaced periodically. Your security system's panel will inform you when a device's battery is low. You will need:  (1) x 123 3V battery (CR17345) *Note: Before changing the Batteries on any ...

    • Interlogix Slim Door/Window sensor - Changing batteries

      Interlogix slim door contacts may need their batteries replaced periodically. Your security system's panel will inform you when a device's battery is low. You will need: (1) x CR2032 3 V coin battery *Note: Before changing the Batteries on any of ...

    • 2GIG Door/Window sensor - Changing batteries

      2GIG door and window contacts may need their batteries replaced periodically. Your security system's panel will inform you when a device's battery is low. You will need: (1) x small flathead screwdriver, (2) x CR2032 3V coin batteries *Note: Before ...